| Name | Loute Wire Tightener |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;760550;76-0550;7605-50; |
| Specialty | Neuro, Ortho & Spine-Wire Tighteners |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Steknor International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Loute Wire Tightener
8-1/2″ (22.0 cm)Â Loute Wire Tightener is ideally suited for use in procedures that require the addition of wire and subsequent tightening of these wires. This instrument can be used to twist and tighten the ends of loose wire without putting undue pressure or strain on these regions which can make them more liable for breakage. It can be used in many procedures specifically those such as fracture approximation in which a minimal amount of foreign material is implanted but the optimal support is obtained to accelerate healing.
Description
Reviews (0)
Shipping & Delivery
Related products
Demel Wire Guide
Demel Wire Guide is a specialized instrument crafted for use in surgical procedures that require the addition of wire. This instrument features a smooth handle from which extends a slim neck and a hook shaped head. Many orthopedic procedures require the use of wire for stability such as to wrap around a bone to approximate a fracture and this instrument can be used to comfortably manipulate wire. This instrument is available in three sizes 30.0 mm, 47.0 mm and 57.0 mm diameters.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)Â Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Hercules-Type Wire Cutter – 4.0 mm Wire Max
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Flat Nose K-Wire Pliers
serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Diamond Pin Wire Cutter
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm)Â Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Hercules-Type Extraction Forceps
tungsten carbide jaws, 7" (18.0 cm)Â Hercules-Type Extraction Forceps are heavy duty forceps made to remove a variety of things such as pins and wires in surgery. These forceps are crafted with tips made from tungsten carbide which is the hardest metal made for surgical instruments resulting in a supremely durable jaw for sustained cutting action. Additionally the handles of this instrument are plated in gold and it is available with 3.0 or 6.0 mm jaws making it the best fit for many different patient needs and surgeon preferences.
Reviews
There are no reviews yet.