| Name | Hercules-Type Front & Side Cutter |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers – Hercules-Type Wire Cutters |
| Material Finish | Stainless Steel/Tungsten Carbide/Rubber |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Nine H Surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
Hercules-Type Front & Side Cutter
replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7″ (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.
Description
Reviews (0)
Shipping & Delivery
Related products
Flush Wire Cutter – Tungsten Carbide
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)Â Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)Â Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Kirschner Bow
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Berry Sternal Needle Holder & Wire Twister
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm)Â Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.
K-Wire Side Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm)Â K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Flat Nose Pliers
serrated jaws, 5-1/2" (14.0 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Hercules-Type Wire Cutter – 3.0 mm Wire Max
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Cannulated Pin Cutter
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm)Â Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Reviews
There are no reviews yet.