| Name | Diamond Pin Wire Cutter |
| Lead Time | 0-3 days |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
| Material Finish | Stainless Steel/Tungsten Carbide |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Steknor International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Diamond Pin Wire Cutter
cuts up to 5/64″ (2.0 mm) diameter hard wire, 6-1/2″ (16.5 cm)Â Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Description
Reviews (0)
Shipping & Delivery
Related products
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Hercules-Type Cable Cutter
replaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm)Â Hercules-Type Cable Cutter can be used to trim and adjust the length of cables. This instrument features replaceable tungsten carbide blades that can be used on for cables from 1.0 mm to 2.0 mm. Tungsten carbide jaws gives this instrument added strength as it is the hardest metal made for surgical instruments and results in a supremely durable jaw that can be used for sustained cutting. Additionally this instrument is 7" long and has gold tipped handles.
Boehler Wire & Pin Extractor
Boehler Wire & Pin Extractor can be used in a variety of procedures to manipulate surgical pins and wire. Many orthopedic procedures such as repair of fractures or insertion of support after laminectomy procedures require the use of wire or pin. These added support confer additional stability to the bone and increase the speed of healing while reducing the damage done by trauma. This particular instrument can be used to insert, remove and reshape wires and pins as they are needed. This instrument is available in three different sizes to satisfy a variety of patient needs and surgeon preferences.
Corwin Wire Twister
tungsten carbide, serrated jaws, long tips, 6-1/4" (15.9 cm)Â Corwin Wire Twister is a specialized instrument crafted to handle wire. Wires can e placed in a variety of surgical settings that require addition of and manipulation of wire. Producedures such as laminectomies require for the vertebrae to be stabilized so that it may heal correctly and reduce trauma to the spine. This twister features tungsten carbide inserts which confer stability as well as serrated jaws which gives them an additional stable grasp on the wire. Additionally this twister has long tips that allow it to fit into some tighter spaces.
Front & Side Wire Cutter – Tungsten Carbide
tungsten carbide jaws, double-action, 1/16" (1.7 mm) maximum capacity, 7-1/8" (18.1 cm)Â Front and Side Wire Cutter is designed for use in surgical procedures that require manipulation of the length of surgical wire. In procedures such as laminectomies or total hip replacements insertion of a wire is necessary to confer some stability to the newly operated upon region. Not only does this give stability but speeds up the healing time and prevents trauma to the area during the healing process. This particular cutter is a front and side cutter and features double action tungsten carbide jaws that has a maximum capacity of 1.7 mm.
Flat Nose K-Wire Pliers
serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Long Jaw Needle Nose Pliers
2-1/4" jaw length, 2.0 mm tip, 7" (17.8 cm)Â Long Jaw Needle Nose Pliers are crafted for use in many different orthopedic surgical procedures. The long tapered jaw design gives the surgeon ability to access deeper into the surgical field. These pliers can be used to firmly grasp wire to twist it or to put particular bends into wire to fasten them to bony sites or around fracture repair to confer additionally stability and accelerate the healing time.
Reviews
There are no reviews yet.