| Name | Cobb Spinal Gouges |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Steknor International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Cobb Spinal Gouges
round knurled handle, 11″ (28.0 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a round knurled handle, these micro serrations allow for added gripping to prevent slipping during use. The gouge is designed to be used in the close spaces of the vertebral canal and around it to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Description
Reviews (0)
Shipping & Delivery
Related products
Alexander Chisel
straight, 7" (18.0 cm)Â Alexander Chisel is crafted for use in surgical procedures that require cutting, scraping and reshaping of bone. This chisel features a long shaft and on one end features a blunt, flat end for hammering while the other a sharpened blade style end. The lack of a designed handle area increases the versatile of this instrument because it can be gripped in any way that makes the surgical maneuver the most effective. This chisel is available in six different sizes in 2.0 mm increments from 4.0 mm to 14.0 mm making it well suited for small and large tasks.
Lambotte Osteotome – W/Out Calibration Lines
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Swan Neck Gouge
9" (23.0 cm)Â Swan Neck Gouge is an instrument designed for gouging or removing particular sections of bone. Additionally it can also be used as a chisel with increased force applied to it to split bone or to scoop out segments to increase access to the center. A unique feature of this particular gouge is the swan shaped curvature that allows it to access difficult to reach areas without obscuring the surgical field and keeping the handle out the plane of surgery.
Lexer Gouge
w/ sterilizable (up to 143 degrees c) plastic handle Lexer Chisel is crafted for use in surgical procedures that require chipping away or splitting bone or more general scraping maneuvers. This gouge features a large plastic handle that is easy to grip. Additionally this handle is sterilizable up to 143 degrees c making it well suited for use in multiple surgical procedures without the concern of contamination or infection. This instrument features a long slim neck that flares out into a flat wide blade perfect for scraping action along bone and also in actual cutting of bone. It is available in a wide variety of widths and two different lengths: 18 cm and 22 cm to accommodate a variety of surgical scenarios and surgeon preferences.
Dawson-Yuhl Gouge
7.0 mm, 11" (28.0 cm)Â Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Hibbs Osteotome
9-1/2" (24.0 cm)Â Hibbs Osteotome is made for use in neurosurgical procedures that require scraping or chiseling through bone. This osteotome features a thick handle for ease in gripping and maneuverability. The handle narrows into a slim neck which widens out again into a chisel type blade. Additionally the blade features a slight curvature increasing its ability to be used to strip or scrape away layers of bone and tissue. This instrument is available in ten sizes ranging from 6.0 mm to 38.0 mm and in either a curved or straight profile allowing it to be useful in a variety of patient scenarios and surgeon preferences.
Stille Osteotome
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Stille Style Chisels
straight, 8" (20.0 cm)Â Stille Style Chisels are designed for use in a wide array of surgical procedures that require manipulating of bone including cutting, scraping, and carving bone. This chisel features a hexagonal handle that is makes it easy to grip and maneuver with reduced slipping. The unique design of this chisel features a blade that widens as it comes to the sharp edge making it effective at distributing force. This chisel is made with a straight profile and in 10.0 mm, 14.0 mm, 18.0 mm and 22.0 mm widths to make it highly versatile and useful in a wide variety of neurosurgical applications.
Reviews
There are no reviews yet.