Hercules-Type Wire Cutter – 4.0 mm Wire Max

3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.

side cutting maximum capacity 1?8" (3.2mm), 9-1/2" (24.1 cm)Double Action Pin Cutter is an instrument ideally suited for use in surgical procedures that require the insertion of surgical pins and subsequently the clipping and resizing of their lengths. Many orthopedic and neurosurgical spinal procedures require the insertion of pins to stabilize a repaired fracture or an inserted graft. These pins often need to be trimmed to allow them to be set at a more appropriate length for the individual patient and these cutter can be used for that. This instrument is double action and is side cutting and has a maximum capacity of 3.2 mm.

side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.

tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.