| Name | Cobb Spinal Gouges |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Steknor International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Cobb Spinal Gouges
round knurled handle, 11″ (28.0 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a round knurled handle, these micro serrations allow for added gripping to prevent slipping during use. The gouge is designed to be used in the close spaces of the vertebral canal and around it to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Description
Reviews (0)
Shipping & Delivery
Related products
Lambotte Osteotome – W/ Calibration Lines
w/ calibration lines, 7-1/4" (18.4 cm)Lambotte Osteotome is designed for use in neurosurgical procedures that require manipulation of bone. This instrument is designed to be used manually to cut through bone. It offers many advantages over drills or mechanical tools such as increased sensitivity to adjust the level of force. Additionally this osteotome has the added benefit of featuring calibration lines. This osteotome is available in twelve widths in a straight profile as well as two widths in a curve profile. A full set of ten featuring straight and curved profiles is also available.
Swan Neck Gouge
9" (23.0 cm)Â Swan Neck Gouge is an instrument designed for gouging or removing particular sections of bone. Additionally it can also be used as a chisel with increased force applied to it to split bone or to scoop out segments to increase access to the center. A unique feature of this particular gouge is the swan shaped curvature that allows it to access difficult to reach areas without obscuring the surgical field and keeping the handle out the plane of surgery.
Hoke Osteotome
5-1/2" (14.0 cm)Â Hoke Osteotome is crafted for preparation and cutting of bone during neurosurgery. This instrument features a sturdy handle for ease in handling which then narrows at the neck and widens again into a blade. One potential use of this osteotome is to saw through the skull to increase access during surgery such as craniotomy. Additionally this instrument can be used to reshape bony areas. This osteotome is available in either a curved or straight profile in size sizes ranging from 3.0 mm to 16.0 mm making this a highly versatile instrument suitable for a number of surgical procedures.
U.S. Army Pattern Chisel
straight, 6-1/4" (16.0 cm)Â US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
Stille Osteotome
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Mini-Lambotte Osteotome
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Cobb Spinal Gouge
hexagonal handle, 9-1/2" (24.1 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Smith-Petersen Gouge
8" (20.0 cm)Â Smith Peterson Gouge is crafted for use in surgical procedures that require manipulation of bone such as scooping or creating a hole. This instrument can be used to increase access to the central soft tissue portion of the bone or in prepping bones from grafting. Uniquely this gouge features a rounded handle that increases gripping and allowing for firm handling and maneuverability. Additionally this instrument is available in either a straight or curved pattern and in seven sizes ranging in width from 6.0 mm to 30.00.
Reviews
There are no reviews yet.