| Name | Cervical Spreader |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Steknor International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Cervical Spreader
improved model, 6-1/4″ (15.9 cm)
Cervical Spreader is an instrument made for use in neurosurgical procedures. It features a ring handled design for ease in manual operation as well as a ratcheting mechanisms that allows it to be set at a variety of widths. This highly customizable tool that is an improved model and has a light lip on the outside of each prong giving it a way to grasp the tissue as it spreads them.
Description
Reviews (0)
Shipping & Delivery
Related products
Caspar Type Counter-Retractor
Caspar Type Counter-Retractor is a specialized instrument made for retraction of soft tissue during neurosurgical procedures. This retractor is available as a frame with six different blades ranging from 35.0 mm to 60.0 mm in 5.0 mm increments. The variety of sizes of blades allows this retractor to be suitable for many different patients and surgeon preferences.
Adson Dura & Nerve Hook
3.0 mm tip, 8" (20.0 cm)Â Adson Dura & Nerve Hook is crafted for use in a wide variety or neurosurgical procedures. This hook is a multipurpose instrument that can be used to retract nerves but can also be used to retract the dural layer of the meninges during craniotomies and spinal surgeries. Additionally this instrument is available with either a sharp or blunt tip making it suited for retraction of very delicate tissue matter with the blunt tip or less sensitive tissue with the sharp tip.
Caspar Nerve Root Retractor
9-1/2" (24.0 cm)Â Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Blount Retractor
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Blade Ejector Forceps
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Beckmann-Adson Laminectomy Retractor
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Cervical Retractor Longitudinal Blade
stainless steel, ball snap closure, blunt Cervical Retractor Longitudinal Blade is an added component to be used alongside the cervical retractor for longitudinal retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction. They are available in variety of sizes and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Adson Laminectomy Retractor
hinged arms, 4x5 blunt prongs, 1-1/8" (2.80 cm), 12-1/8" (31.0 cm)Adson Laminectomy Retractor is ideally suited for use in retraction of muscle and soft tissue layers during laminectomy procedures. This procedure removes the lamina, a portion of the vertebrae, and it is necessary to have full access to the vertebrae in question. This retractor features ring handles for ease in handling as well as hinged arms and blunt prongs that provide a gentle but secure hold on the tissue.
Reviews
There are no reviews yet.