| Name | Caspar Type Counter-Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Steknor International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Caspar Type Counter-Retractor
Caspar Type Counter-Retractor is a specialized instrument made for retraction of soft tissue during neurosurgical procedures. This retractor is available as a frame with six different blades ranging from 35.0 mm to 60.0 mm in 5.0 mm increments. The variety of sizes of blades allows this retractor to be suitable for many different patients and surgeon preferences.
Description
Reviews (0)
Shipping & Delivery
Related products
Campbell Nerve Retractor
10.5 mm wide blade, 8-7/8" (22.5 cm)Â Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Charnley Initial Incision Retractor
standard pattern Charnley Initial Incision Retractor is a unique instrument specifically designed for use in retraction at the beginning of surgical intervention when the first incision is made. An ideal tool for a vase array of neurosurgical procedures because it securely open up the surgical field to give unobstructed access. This retractor set includes a frame, a long blade, short blade as well as a weight on a chain.
Beckmann-Eaton Laminectomy Retractor
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)Â Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Blount Retractor
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Carbon Fiber Radiolucent Longitudinal Blade
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Caspar-Type Titanium Spinal Spreading System
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Cloward Style Blade Retractor
7-1/2" (19.0 cm)Cloward Style Blade Retractor is a highly versatile instrument crafted for use in a variety of neurosurgical procedures. It is best suited for use in retraction such as that which is necessary in spinal surgery. The ribbed handle giving additional gripping ability and the angled blade design makes it easy to manipulate in the surgical field while keeping the handle out of the plane of surgery. Additionally this retractor is available in four different sizes 13.0 mm (no lip), 18.0 mm, 20.0 mm and 25.0 mm.
Cervical Retractor – Hinged Frame Only
hinged arms
Cervical Retractor can be used in a variety of neurosurgical procedures, specifically spinal surgeries. It features a ring handle for ease in manual operation as well as a hinged frame. This retractor can be used in laminectomies and other surgical maneuvers that require increased access to the spinal lamina or vertebral arch. This instrument is available with either rigid or hinged arms.
Reviews
There are no reviews yet.