Name | Brackman Suction Tube |
Lead Time | 0-3 days |
Competitor | ;MA497R;099505;09-9505;0995-05;N06067A;N0606-7A;099507;09-9507;90-8022;N0605 7A;908022;0995-07;0995-05_0995-07; |
Specialty | General Instruments-Suction Tubes, Needles & Probes – Suction Tubes |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Steknor International |
Sterility | Non-Sterile |
Usage | Reusable |
Suction Tube
Suction Tube
offset suction tip holes, 3″ (7.5 cm) working length
Brackman Suction Tube contains a thumb plate on the handle to rest the finger on and also to control the bypass hole. The tube itself is either 5 or 7 French and has offset suction tip holes. These fine suction tips are designed to be used in surgeries, such as myringoplasty, for areas that are narrow or more delicate in order to avoid excess suction.
SKU:
SN-33774
Category: Suction Tubes, Needles & Probes
Description
Reviews (0)
Be the first to review “Suction Tube” Cancel reply
Shipping & Delivery
Related products
Cooley Graft Suction Tube
Cooley Graft Suction Tube
8.0 mm wide round perforated tip, 7" (17.8 cm) working length, 12" (30.5 cm) overall length
Cooley Graft Suction Tube is a popular instrument used in various surgical operations to eliminate and clear bodily fluids that may obstruct the view of the surgical site. For this reason, the distal end of the tube contains a piece that is attached to a suction machine in order to provide the suction power for the instrument to perform. The other end contains a long tube that has an 8.0 mm wide tip, which allows it to extract greater amount of fluid away from the area.
Frazier Suction Tube Stylet
Frazier Suction Tube Stylet
Frazier Suction Tube Stylet is a thin wire device that serves the purpose of clearing any contents that remain inside the Frazier Suction Tube. All of the sizes offered of this stylet are specifically designed to enter each of the various sizes and thickness of the Angled Frazier Suction Tube with finger cut-off and 4" working length.
Tongue Tie – Plain Point
Tongue Tie - Plain Point
stainless steel, plain point
Grooved Director and Tongue Tie contains a plain point at one end and a butterfly-shaped director on the other end. This stainless steel instrument is typically used during a frenotomy to lift the tongue back and expose the frenulum. The frenulum would rest on the grooved part of the director and then be cut with iris scissors. Depending on the patient, this device is offered in various lengths.
Frazier Suction Tube – Extra-Long
Frazier Suction Tube - Extra-Long
extra-long, angled, w/ finger cut-off, 7-1/8" (18.1 cm) working length
Frazier Suction Tube is an extra-long style consisting of a 7 1/8" working length. The handle contains a finger cut-off to rest the finger on, and the tube is angled near the base. The intended purpose of this instrument is to eliminate the operating area of any fluids or substances that may be present so that the surgeon is provided with a clear view. Thus, the suction tube may be used for general surgeries and even gynecological procedures.
Frazier Suction Tube – Semi-Rigid W/ Slot
Frazier Suction Tube - Semi-Rigid W/ Slot
angled, semi-rigid w/ slot, 5-1/2" (14.0 cm) working length
Frazier Suction Tube is semi-rigid with a slot on the handle. The tube is angled and is primarily utilized during general surgeries to remove any fluids or blood that may occupy the surgical site obstructing the surgeon's view. In this case, the thin diameter of the tube, in addition to the 5 ½" length, is able to enter small areas that require matter to be eliminated.
Gallbladder Trocar
Gallbladder Trocar
6" (15.2 cm)
Ochsner Gallbladder Trocar is a 6" long instrument and is available in various French circumferences. With the help of a sharp point, the main purpose of this trocar is to drain a fluid-filled cavity. For example, if any pus or mucus resides in the gallbladder, this instrument is able to withdraw that liquid.
Double-Ended Probe
Double-Ended Probe
stainless steel
Double-Ended Probe is made from stainless steel to assist in the longevity of the instrument. This probe has blunt ends on each side and can be used to enter small openings in the body during general surgeries to retrieve information such as depth or size. This information can be used to determine whether foreign bodies or other issues exist.
Poole Suction Tube
Poole Suction Tube
stainless steel.
Poole Suction Tube is comprised of premium German operating-room grade stainless steel. This device is offered in a straight or curved style in different French measurements and overall lengths. The body of the suction tube contains many small holes, which minimizes the possibility of fat or omentum getting clogged during surgeries such as abdominal procedures.
Reviews
There are no reviews yet.